Marvell Technology has begun sampling a 5nm 1.6T Ethernet PHY with 100G I/O capability, featuring built-in Media Access Control security (MACsec) and full support for Precision Time Protocol (PTP).
MACsec allows data center operators to enable hardware-based link-layer security and PTP enables Ethernet networks to support ultra-reliable timing- critical services. The X9340P and the previously announced Alaska C X93160 PHY together provide a pin-compatible, flexible platform for retiming, gearboxing, encryption and timing applications for speeds up to 800GbE.
Marvell’s new “Alaska” X9340P is built on the company’s PAM4-based 112 Gbps SerDes technology and delivers 40% lower power-per-bit compared to PHYs using 56Gbps PAM4-based SerDes technology. The Alaska C X9340P PHY incorporates the IEEE 802.1AE 256-bit MACsec capability in the PHY, providing for flexible encryption deployment while eliminating the cost and power burden of including this functionality in the switch ASIC. Marvell is supporting the Switch Abstraction Interface (SAI) driven by the Open Compute Project (OCP) on both the X9340P and X93160 devices to enable the vendor-independent control of networking equipment elements demanded by leading cloud data center customers.
The new PHY also integrates support for PTP for timing-critical use cases in 5G and telecom applications. The stringent timing requirements of 5G networks and applications served by them are driving the timing accuracy that needs to be delivered by networks supporting these services. The inclusion of Class C PTP timestamping enables the support of sub-microsecond end-to-end clock synchronization accuracy needed for 5G Ultra-Reliable Low-Latency Communications (URLLC) services that enable mission-critical use cases such as industrial automation.
“100G PAM4 I/Os and 800 Gigabit Ethernet are the next leap forward for the industry,” said Venu Balasubramonian, vice president of product marketing, High Speed Connectivity and PHY Business Unit at Marvell. “Our newest 1.6T Alaska C PHY solidifies Marvell’s position as the silicon provider with one of the broadest and most advanced high-speed Ethernet PHY portfolios for cloud data center and carrier markets.
Marvell introduced its Alaska A PAM4 DSP family for Active Electrical Cables (AECs) designed for data center interconnects by hyperscale customers.The new Alaska 400G/800G DSPs, fabricated in 6nm process, leverages Marvell’s PAM4 DSP technology to improve signal integrity in copper, short reach AECs to address emerging 100G/lane adoption in cloud data center interconnect architectures. The new Alaska 400G/800G DSPs add to Marvell’s comprehensive…